How much concrete do I need for a 10×10 slab? Before you order, work out the concrete calculator cubic yards total for your slab — for a 10×10 slab at 4 inches deep it is 1.24 cubic yards. A 10-by-10-foot slab at 4 inches thick needs about 1.25 cubic yards of concrete, or about 56 eighty-pound bags. At 6 inches thick, the same slab needs about 1.85 cubic yards, or about 83 eighty-pound bags. Always order 5 to 10 percent extra, because running short in the middle of a pour is far worse than having a little left over. Our free Concrete Calculator works out the exact amount for any slab size, and this guide explains the thickness, the bag math and the cost behind it.
The Concrete Formula
The formula is: length (feet) x width (feet) x thickness (inches) / 324 = cubic yards. Or, if you prefer, length x width x thickness (in feet) / 27 = cubic yards.
For a 10-by-10-foot slab at 4 inches thick: 10 x 10 x 4 / 324 = about 1.24 cubic yards. Round it up to 1.25, then add 5 to 10 percent for waste, so order about 1.35 cubic yards. For the same slab at 6 inches thick: 10 x 10 x 6 / 324 = about 1.85 cubic yards, so order about 2 cubic yards.
How Much Concrete Do I Need for a 10×10 Slab? (Common Sizes)
Here is what common slab sizes need at 4 inches thick, the standard for patios and walkways:
- 10 x 10 feet: about 1.25 cubic yards, about 56 eighty-pound bags
- 12 x 12 feet: about 1.8 cubic yards, about 80 eighty-pound bags
- 10 x 20 feet: about 2.5 cubic yards, about 112 eighty-pound bags
- 20 x 20 feet: about 4.95 cubic yards, about 222 eighty-pound bags
At 6 inches thick, the standard for driveways, multiply those numbers by 1.5. A 10-by-20-foot driveway slab at 6 inches thick needs about 3.7 cubic yards. A 20-by-20-foot slab at 6 inches thick needs about 7.4 cubic yards. The concrete calculator cubic yards figure scales the same way, so a 6-inch slab needs half as much again as a 4-inch one. How much concrete do I need for a 10×10 slab at 6 inches thick? About 1.85 cubic yards.
How Thick Should a Concrete Slab Be?
Four inches is the standard for a patio, walkway or shed floor. Four to six inches is the standard for a driveway, with 6 inches lasting longer and handling heavier vehicles. A garage floor is usually 4 to 6 inches, with 6 inches better for trucks and heavy storage. Heavy trucks or RV parking needs 6 to 8 inches, and steel reinforcement. The concrete calculator cubic yards figure changes with the thickness, so re-run it if you move from 4 inches to 6.
Thinner than 4 inches cracks easily under normal use. Whatever the thickness, the ground underneath must be firm and level, with a 4-inch gravel base for driveways. For footings under walls and posts, see our Concrete Footing Calculator.
How Many Bags of Concrete Do I Need?
For a small slab, bagged concrete mix makes sense. The number of bags depends on the bag size.
- 80-pound bag: yields about 0.6 cubic feet, so one cubic yard takes about 45 bags.
- 60-pound bag: yields about 0.45 cubic feet, so one cubic yard takes about 60 bags.
- 50-pound bag: yields about 0.375 cubic feet, so one cubic yard takes about 72 bags.
For a 10-by-10-foot slab at 4 inches thick (about 1.25 cubic yards), that works out to about 56 eighty-pound bags or about 74 sixty-pound bags. For anything over about a cubic yard, ready-mix concrete delivered by truck is usually cheaper and far easier than mixing dozens of bags by hand. A standard ready-mix truck carries about 10 cubic yards. The concrete calculator cubic yards figure comes with the bag counts, so you can compare bags against ready-mix for the same slab. How much concrete do I need for a 10×10 slab in bags? About 56 eighty-pound bags at 4 inches thick.
Ready-Mix or Bags: Which Should You Pick?
Bags make sense for a small slab, a repair, or a place a truck cannot reach. You mix them one at a time with water, which is slow but simple. Ready-mix makes sense for anything over about a cubic yard. The truck delivers the concrete mixed and ready to pour, and you finish it in one go instead of mixing bag after bag.
Ready-mix usually runs about $125 to $200 per cubic yard delivered, with prices varying by region and mix. Short loads under about 3 cubic yards often carry an extra fee. Bagged mix usually sells for $4 to $7 per bag, which works out to far more per cubic yard than ready-mix. Start from the concrete calculator cubic yards figure for your slab, then multiply by the local price per cubic yard to get the ready-mix cost. How much concrete do I need for a 10×10 slab? Order about 1.35 cubic yards to cover the 5 to 10 percent extra.
How Much Does a Concrete Slab Cost?
For a 10-by-10-foot patio slab at 4 inches thick, the concrete alone costs roughly $160 to $250 delivered as ready-mix, or about $225 to $390 in bags. Installed prices, including labor, excavation and the base, usually run about $6 to $10 per square foot for a basic 4-inch slab. A 10-by-10-foot patio installed usually runs $600 to $1,000, and more for stamped, colored or reinforced work. Prices vary a lot by region, so get two or three quotes before you start. Quikrete, which makes the bagged mixes most stores carry, also publishes a concrete calculator and bag-count guides for small slabs.
Common Mistakes to Avoid
- Adding too much water to the mix. It makes the concrete easier to pour, but it weakens it a lot. Use the water the bag or the supplier specifies, no more.
- No control joints. Concrete shrinks as it cures. Without joints cut every 8 to 12 feet, it cracks where it wants to, not where you want it to.
- Pouring on soft or unlevel ground. The slab follows the ground and cracks.
- Skipping the gravel base under a driveway.
- Ordering exactly the calculated amount. Always add 5 to 10 percent. A short load costs more than a little extra concrete.
- Pouring in extreme weather. Above about 90 degrees it sets too fast and can crack. Below freezing it can freeze before it cures.
Bottom Line
A 10-by-10-foot slab at 4 inches thick needs about 1.25 cubic yards of concrete. Use 4 inches for patios and walkways, 4 to 6 inches for driveways, order 5 to 10 percent extra, and let the concrete cure properly. Use our free Concrete Calculator to work out how many cubic yards and bags you need before you order. So how much concrete do I need for a 10×10 slab? About 1.25 cubic yards at 4 inches thick.
Written by the Yard & Bag Editorial Team. Our content is researched and checked against supplier guidance and standard building practice.
