Retaining Wall Cost Calculator

Estimate the materials and cost for building a retaining wall, by length, height and block type. Use this retaining wall cost calculator to estimate the blocks, gravel and cost of your wall before you build.

Retaining Wall Cost Calculator

ft
ft

Free to use • No sign-up needed

Bury the first course and step the base into the slope. Walls over 4 ft usually need engineering and a permit — check local code.

How to Use This Calculator

  • Measure the length and height of the wall in feet.
  • Enter the block size and type you plan to use.
  • Add any base gravel or drainage needs, if asked.
  • Click Calculate to see your materials and estimated cost.

What Is a Retaining Wall?

A retaining wall holds back soil on a slope. It turns a steep bank into level, usable ground, stops erosion, and keeps soil from sliding onto a driveway, path or house. Garden walls under 2 feet are mostly decorative. Walls over 4 feet are structural, and in most places they need a permit and an engineer.

A retaining wall is not just a stack of blocks. It has a compacted gravel base, a drainage pipe behind it, gravel backfill, and usually a slight lean back into the hill. The drainage is the part that decides whether the wall lasts 30 years or leans and falls in five.

Types of Retaining Walls

  • Concrete block: Interlocking blocks made for walls. The most common choice. Installed cost usually runs $15 to $30 per square foot of wall face, depending on the block and the height.
  • Poured concrete: Strong and long-lasting, but it needs forms and a concrete truck. Installed cost usually runs $20 to $35 per square foot.
  • Natural stone: The best-looking option, and one of the most expensive. Installed cost usually runs $25 to $50 per square foot or more, depending on the stone and the style.
  • Timber: Pressure-treated wood timbers stacked and pinned. The cheapest option, usually $15 to $25 per square foot installed, but it lasts 10 to 20 years, not 50.
  • Gabion: Wire baskets filled with rock. Rugged, drains well and suits large or sloped sites. Installed cost usually runs $20 to $40 per square foot.

Prices vary a lot by region, height, access and soil. Get two or three quotes before you start.

How Height Changes the Cost

Wall height is the biggest cost driver. A 2-foot garden wall is a weekend DIY job. A 4-foot wall needs a proper base, drainage and compaction. A wall over 4 feet usually needs a building permit and an engineered design, which adds cost and time.

Taller walls need more material, a deeper base, and often geogrid, a plastic mesh buried in the soil behind the wall that ties the wall to the hill. A 6-foot wall costs far more per square foot than a 3-foot wall, because the engineering and the drainage get more serious. If your slope needs more than 4 feet of wall, consider two shorter walls stepped up the hill instead of one tall one. It looks better and is often cheaper.

What Materials Do You Need?

Beyond the wall material itself, a proper retaining wall needs:

  • Base gravel: Crushed stone, compacted in a trench under the first course of blocks. Usually 6 inches deep for a wall under 4 feet.
  • Drainage pipe: A perforated pipe at the base of the wall, wrapped in fabric, that carries water away. This is the single most important part of the wall.
  • Gravel backfill: Clean gravel behind the wall, at least 12 inches wide, so water drains down to the pipe instead of pushing on the wall.
  • Landscape fabric: Keeps soil from washing into the gravel and clogging the drain.
  • Cap blocks: Flat caps on top of the wall that finish the look and keep water out of the hollow blocks.
  • Geogrid: For walls over about 4 feet, mesh layers buried in the soil behind the wall.

Skipping the drainage and the backfill is the most common reason walls fail. Water builds up behind the wall, the pressure grows, and the wall leans or falls.

DIY or Hire a Pro?

A wall under 3 feet, on flat ground, with easy access, is a realistic DIY job if you are comfortable digging, leveling and lifting heavy blocks. Budget a full weekend for a 20-foot wall, and expect to move a lot of gravel and soil by hand.

Hire a pro if the wall is over 4 feet, the ground is steep or wet, access is tight, or a permit is needed. A contractor brings the right compaction equipment and knows the drainage details that keep a wall standing. The labor is usually about half the total cost of a retaining wall, so DIY saves real money on a small wall, but a failed wall costs far more to rebuild than a pro would have charged.

Common Mistakes to Avoid

  • No drainage. The number one reason retaining walls fail. Always install the pipe and the gravel backfill.
  • No compacted base. Blocks set on loose soil settle and the wall goes crooked.
  • Building straight up. A wall should lean back into the hill slightly, about 1 inch for every foot of height, so the soil pressure pushes it into the hill, not over.
  • Building over 4 feet without a permit or engineer. It can mean fines, and an unpermitted wall can cause problems when you sell the house.
  • Using the wrong blocks. Regular garden blocks are not made for walls over 2 feet. Use blocks rated for retaining walls.
  • Backfilling with soil instead of gravel. Soil holds water against the wall. Gravel drains it away.

Bottom Line

Pick a wall type that fits your height and budget, never skip the drainage pipe and gravel backfill, and get a permit and an engineer for anything over 4 feet. Use the calculator above to work out the cost of your wall before you order materials or call a contractor.

Written by the Yard & Bag Editorial Team. Our content is researched and checked against supplier guidance and standard building practice.

Frequently Asked Questions

How much does a retaining wall cost?

Retaining walls are usually priced per square foot of wall face, installed. Concrete block runs about $15 to $30 per square foot. Poured concrete runs about $20 to $35. Natural stone runs about $25 to $50 or more. Timber runs about $15 to $25, but lasts 10 to 20 years, not 50. Gabion baskets run about $20 to $40. Prices vary a lot by region, height, access and soil, so get two or three quotes before you start.

Do I need a permit for a retaining wall?

Walls over 4 feet usually need a building permit and an engineered design, which adds cost and time. Garden walls under 2 feet are mostly decorative and usually do not need a permit. Rules vary by town, so check with your local building department before you start.

Why does a retaining wall need drainage?

Water builds up behind a wall with no drainage, the pressure grows, and the wall leans or falls. A perforated drainage pipe at the base of the wall, wrapped in fabric, plus at least 12 inches of clean gravel backfill, carries water away to the pipe. Skipping the drainage and the backfill is the most common reason walls fail.

How deep should the base be?

For a wall under 4 feet, the base is usually 6 inches of crushed stone, compacted in a trench under the first course of blocks. Taller walls need a deeper base, and walls over about 4 feet usually need geogrid, a plastic mesh buried in the soil behind the wall that ties the wall to the hill.

Can I build a retaining wall myself?

A wall under 3 feet, on flat ground, with easy access, is a realistic DIY job if you are comfortable digging, leveling and lifting heavy blocks. Budget a full weekend for a 20-foot wall, and expect to move a lot of gravel and soil by hand. For a wall over 4 feet, hire a professional, because it needs a permit, an engineered design and proper drainage.

Scroll to Top