How much does a cubic yard of gravel weigh — pile of gravel in a supply yard

How Much Does a Cubic Yard of Gravel Weigh?

How much does a cubic yard of gravel weigh? One cubic yard of gravel weighs about 2,700 pounds, or about 1.35 tons. That is the number most suppliers use for dry crushed stone, and it is the figure our free Gravel Calculator uses when it converts your cubic yards into tons. The exact weight changes with the stone type and how wet it is, so this guide gives you the weight by type, the ton math, and what it means for delivery. Use our gravel weight calculator to check the weight before your truck or trailer is loaded.

How Much Does a Cubic Yard of Gravel Weigh? (By Type)

The weight of a cubic yard depends on the stone. Crushed stone is angular and packs tightly, so it is near the heavy end. Round stone has more air between the pieces, so it is a little lighter. Wet stone weighs more than dry stone, because water fills the gaps.

  • 3/4-inch crushed stone: about 2,700 pounds per cubic yard (about 1.35 tons)
  • Crusher run: about 2,800 pounds per cubic yard (about 1.4 tons) — the stone dust fills the gaps, so it packs heavier
  • Pea gravel: about 2,600 pounds per cubic yard (about 1.3 tons)
  • River rock: about 2,700 to 2,900 pounds per cubic yard, depending on the size
  • Recycled concrete: about 2,500 pounds per cubic yard (about 1.25 tons)

These are typical dry weights. Wet gravel can weigh 5 to 10 percent more, because a cubic yard can hold a surprising amount of water. If you are ordering after heavy rain, expect the delivered weight to be at the high end of the range. Our gravel weight calculator turns cubic yards into tons using the dry weight.

How to Use Our Gravel Weight Calculator

To turn cubic yards into tons, multiply the cubic yards by 1.35 for crushed stone. To turn tons into cubic yards, divide the tons by 1.35.

  • 1 cubic yard = about 1.35 tons
  • 2 cubic yards = about 2.7 tons
  • 5 cubic yards = about 6.75 tons
  • 10 cubic yards = about 13.5 tons
  • 1 ton = about 0.74 cubic yards

For other stone types, use their own factor: pea gravel about 1.3, crusher run about 1.4. Our Gravel Calculator does this conversion for you. Enter your length, width and depth, and it shows cubic yards, tons and bags together. A quick check with our gravel weight calculator saves the arithmetic. How much does a cubic yard of gravel weigh in tons? For crushed stone, about 1.35 tons.

How Many Cubic Yards Are in a Ton of Gravel?

About 0.74 cubic yards of crushed stone make one ton. In practical terms, a ton of gravel covers about 75 square feet at 3 inches deep, or about 55 square feet at 4 inches deep.

Suppliers usually sell gravel by the cubic yard or by the ton, and the price per ton and per cubic yard are just two ways of saying the same thing. If one supplier quotes $40 per cubic yard and another quotes $30 per ton, the ton quote is cheaper for crushed stone, because a cubic yard is about 1.35 tons. Always convert to the same unit before comparing prices.

How Much Does a Bag of Gravel Weigh?

Bagged gravel is sold by weight, usually in 50-pound bags or 0.5-cubic-foot bags. One cubic yard equals about 54 bags of 50 pounds. A 50-pound bag covers about 2 square feet at 3 inches deep.

Bags make sense for a small patch or a top-up. For a driveway or a large bed, bulk delivery is far cheaper per cubic yard. A standard dump truck carries about 10 to 14 cubic yards, which is about 13 to 19 tons. Make sure the delivery spot can take that weight, and ask the driver to place the pile as close to the work area as possible. Our gravel weight calculator also works out the bag count. How much does a cubic yard of gravel weigh in bags? About 54 fifty-pound bags.

What the Weight Means for Delivery

Weight decides how much a truck can carry and where it can go. A full dump truck of gravel can weigh 20 tons or more with the truck itself, so soft ground, a steep driveway or a weak bridge can be a problem. Tell the supplier about access before you order, and ask whether they can deliver in smaller loads if the access is tight. The National Stone, Sand & Gravel Association is the trade body for the quarries that produce

Weight also matters for the ground under the gravel. A driveway base of crushed stone spreads the load, which is why a proper base matters so much. For the base stone amount, see our Stone Calculator.

Common Mistakes to Avoid

  • Using the wrong weight. Pea gravel and crushed stone do not weigh the same per cubic yard, so the ton count changes with the stone type.
  • Comparing prices in different units. Convert tons and cubic yards to the same unit before comparing suppliers.
  • Ordering by the ton when the supplier sells by the yard, or the other way round, without converting. A short load costs more than a little extra gravel.
  • Forgetting wet weight. Gravel delivered after rain weighs more, and the truck may carry fewer cubic yards per load.
  • Ignoring the delivery spot. A 20-ton truck needs firm, level ground to dump safely.

Bottom Line

One cubic yard of crushed stone weighs about 2,700 pounds, or about 1.35 tons. Multiply your cubic yards by 1.35 to get tons, and always add 5 to 10 percent extra. Use our free Gravel Calculator to work out the cubic yards, tons and bags for your project before you order. So how much does a cubic yard of gravel weigh? About 2,700 pounds dry, or about 1.35 tons.

Written by the Yard & Bag Editorial Team. Our content is researched and checked against supplier guidance and standard building practice.

Scroll to Top